Hi, I’m Jen from Online Fabric Store. Making a baby blanket is fun because you get to choose prints and colors you like. The blanket I’m going to make is quick and easy. So let’s get started. The materials you’ll need are: 1 yard of minky, I’m using Gray Minky Dot fabric, 1 yard of cotton, I’m using Michael Miller Zoology Sea fabric, fabric scissors, a fabric marker, a ruler, ballpoint pins, and thread. Measure a 36 by 36 inch square out of the cotton and minky fabrics. Make sure you’re measuring on the wrong side of the fabric. Cut out both squares. Place the wrong side of the minky fabric on the table. Center the cotton fabric over the minky with the right side facing up. Fold the edges over 1 inch twice on all four sides and pin. For the corners, snip the extra fabric off at an angle before folding. Stitch with a 1/4 inch seam allowance along the fold line.
Back stitch at the beginning and the end. To keep the corners down, stitch along the outside edge. The baby blanket is now complete. By folding the edges over it gives the blanket a border and creates a finished look. You can use either side of this blanket. Thanks for watching this OFS project. .