How to Dye Fabric: Rit All-Purpose Dye

With rit all-purpose Dye you can dye fabrics containing natural fibers like Cotton linen wool or silk and also Rayon and Nylon I’m going to dye samples of a bunch of different fabrics and see what happens. Pre-Wash the fabric to remove any finishes, so the dye will absorb better. Use enough water so the fabric can move around freely The hotter the water the better, so use really hot tap water or heat the water until it’s almost boiling. From here you can use the stove top method where you keep the dye bath on a low simmer throughout which will get the darkest richest colors or you can dye in a container or a stainless steel sink. I’m dyeing the samples in two batches because some of the fabric like salt added and some likes vinegar instead.

Shake the Dye well and add it to the water. as a general guideline for every pound of fabric use half a bottle of liquid dye or one package of powdered dye in three gallons of water To get dark or saturated colors double the amount of dye. I’m using half a cup and each to get a very saturated purple Add salt to the dye bath for Cotton linen and Rayon fabrics or add vinegar for silk wool and Nylon fabrics I’m adding about half a cup of each, but add more for larger projects Stir well Put the wet fabric in the dye bath. In the salt dye bath, I’m putting in bleached and unbleached Muslin 100% Cotton broadcloth and two different poly cotton blends Natural canvas Cotton Jersey Scrim Chintz Irish Linen Rayon Challis Natural burlap white Sultana Burlap and Polyester Gabardine In the Vinegar Dye bath, I’m putting in silk Chiffon silk Organza silk habutae silk Shantung 100% wool felt Rayon Wool Blend felt coated Nylon Oxford fabric Nylon stretch lace Nylon Crystal Organza and Nylon Glitz Sequins Stir continuously for anywhere between 15 minutes to an hour Take it out sooner for lighter colors or leave it in longer for Darker colors Make sure the dye is getting to all parts of the fabric.

So it won’t be splotchy here’s a couple tips for Dyeing: Wear gloves whenever handling the Dye and cover any surfaces that need protection before starting Dryclean only and fabrics that can’t withstand heat shouldn’t be dyed, but if you want to try test out a small piece first Keep in mind that most clothing is made of polyester thread which won’t die with rit all-purpose die Dyeing white fabrics has the best results you can dye other colors, but the original color may affect the outcome You can use rich color remover first to get rid of as much color as possible Remove the fabric from the dye bath when it reaches your desired color keep in mind Fabric looks Darker when wet We suggest using Rit Colorstay fixative before rinsing to increase color retention and reduce bleeding For small projects you can spray the fixative directly on the fabric until saturated or for larger items mix it in a water bath According to the instructions on the bottle.

Let it sit for 20 minutes Rinse the Fabric with warm water, then cooler water until it runs clear And finally hand wash or machine wash with warm water and air dry or tumble dry with an old towel. .

Easy DIY Baby Blanket Sewing Tutorial

Hi, I’m Jen from Online Fabric Store. Making a baby blanket is fun because you get to choose prints and colors you like. The blanket I’m going to make is quick and easy. So let’s get started. The materials you’ll need are: 1 yard of minky, I’m using Gray Minky Dot fabric, 1 yard of cotton, I’m using Michael Miller Zoology Sea fabric, fabric scissors, a fabric marker, a ruler, ballpoint pins, and thread. Measure a 36 by 36 inch square out of the cotton and minky fabrics. Make sure you’re measuring on the wrong side of the fabric. Cut out both squares. Place the wrong side of the minky fabric on the table. Center the cotton fabric over the minky with the right side facing up. Fold the edges over 1 inch twice on all four sides and pin. For the corners, snip the extra fabric off at an angle before folding. Stitch with a 1/4 inch seam allowance along the fold line.

Back stitch at the beginning and the end. To keep the corners down, stitch along the outside edge. The baby blanket is now complete. By folding the edges over it gives the blanket a border and creates a finished look. You can use either side of this blanket. Thanks for watching this OFS project. .